Can Am Modular Helmet Guide: How to Choose the Right Fit and Features
Learn how to choose a Can Am modular helmet by checking fit, ventilation, visor and intercom readiness, plus common mistakes to avoid before you buy.
Updated November 2026
A Can Am modular helmet is a flip-up design that lets you ride with a full-face shell and open the chin bar when you want air or easy conversation at a stop. This guide walks you through checking fit, matching the helmet to your riding, and confirming the features that matter for a can am modular helmet. By the end, you will know what to look for and what to verify before you order.
Confirm the Right Size and Fit
Start with a head measurement. Wrap a soft tape around your head about one inch above your eyebrows and the widest part of the back of your skull, then compare that circumference to the manufacturer’s size chart. Charts vary between brands and sometimes between helmet models, so always use the chart for the specific shell you are considering.
Fit is more than circumference. Put the helmet on with the chin bar closed and the strap fastened. It should feel snug across the cheeks and forehead with no pressure points, and it should not shift when you shake your head. Your cheeks should compress slightly as the liner settles. If the helmet rocks back on your head or lifts at the brow, try a smaller size.
Check the Modular Mechanism and Chin Bar
A modular helmet is only as useful as its flip-up mechanism. Lift the chin bar fully and lower it several times. It should latch with a firm, audible click and stay closed under light pressure without rattling. Check whether the bar opens smoothly with one hand, since you may need to do this at a traffic light.
Also confirm how the helmet behaves when the chin bar is open. Some riders report that open-face riding is only safe at low speeds, and most manufacturers state that the helmet must be fully closed and locked for the rated level of protection. Read the owner’s manual on this point before you ride with the bar raised.
Match Ventilation, Visor and Electronics to Your Ride
Think about where you ride. Hot-weather riders benefit from chin and crown vents that you can open and close while moving. Cold-weather riders may want a helmet with a removable liner and a clean seal around the neck. Test each vent by hand in the store if you can, and make sure you can reach it while wearing gloves.
If you plan to add a camera or Bluetooth intercom, check for a flat mounting area and a clear route for cables. Some riders find that a helmet camera mount sits better on a helmet designed for accessories. For a deeper look at mounting options, see 4 Best Modular Helmet Camera Mount Options Compared for Riders (2026). If you are unsure whether your visor or shell will suit a camera, Universal Helmet Mount for Camera: 6 Steps to a Secure Setup covers how to place and secure a mount without blocking your view.
Compare Style Options Before You Buy
Modular helmets come in several shell styles, and a retro look may change how the helmet fits and vents. If you are weighing a classic appearance, Which Retro Full Face Motorcycle Helmet Should You Buy? 5 Things to Check explains the features to compare. For a traditional shape with a different feel, What Makes a Classic Full Face Motorcycle Helmet Different? Key Facts describes how those shells differ from modern designs.
Quick Fit Checklist
- Measure head circumference and compare it to the brand’s chart.
- Wear the helmet for at least 10 to 15 minutes to check for pressure points.
- Open and close the chin bar several times, one-handed.
- Test each vent with gloves on.
- Confirm the visor seats and locks without gaps.
- Check the manufacturer’s rules for riding with the chin bar open.
Common Mistakes to Avoid
- Buying by the size number on a different brand’s chart.
- Ignoring the chin bar latch during the fitting, then finding it loose on the road.
- Assuming an accessory mount fits any shell without checking the manufacturer’s guidance.
- Riding with the chin bar open at speed because it feels cooler.
- Skipping a try-on with the glasses or sunglasses you usually wear.
Recommended Gear
A helmet bag protects the shell and visor between rides and makes transport easier. View on Amazon
A visor cleaning kit helps keep the lens clear without scratching the coating. View on Amazon
FAQ
Can I ride with the chin bar open?
Many manufacturers rate their modular helmets only when the chin bar is fully closed and locked. Check the owner’s manual for the specific model before riding with the bar raised.
How do I know if my can am modular helmet fits correctly?
It should feel snug without pressure points, stay in place when you shake your head, and keep the chin bar latched firmly. Wear it for at least 10 to 15 minutes before deciding.
Should I get a modular helmet if I plan to add a camera?
Modular helmets can work well with cameras if the shell has a suitable mounting area. Confirm the mount method with the helmet maker’s guidance before you attach anything.
Conclusion
A well-chosen can am modular helmet fits snugly, latches securely, and suits the conditions you ride in. Work through the fit checklist, test the chin bar and vents, and confirm any accessory plans before you buy. If you have a medical or safety concern about helmet fit, consult a qualified professional.
Ready to choose one?
