We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Sec Modular Helmet Size Chart: How to Measure and Pick Your Fit

Use this sec modular helmet size chart guide to measure your head, match it to the brand chart, and get a snug, safe fit before you buy.

Updated November 2026

A sec modular helmet size chart tells you which shell size to order based on your head circumference. This guide shows you how to take an accurate measurement, read the chart correctly, and check the fit once the helmet arrives. Getting the size right matters more than most riders expect, because a helmet that moves or pinches will not protect you the way it was designed to.

Measure Your Head Before Using the Chart

Charts are built around head circumference, not your hat size or your usual shirt size. Use a soft tape measure and follow these steps:

Shopping for one? See our guide: 4 Best Modular Helmet Camera Mount Options Compared for Riders (2026).

  1. Wrap the tape around your head about one inch above your eyebrows and ears, keeping it level all the way around.
  2. Keep the tape snug but not tight. It should sit flat without digging into the skin.
  3. Measure to the nearest millimeter or quarter inch, and note whether you used metric or imperial units.
  4. Repeat the measurement twice. If the numbers differ by more than a few millimeters, measure a third time and use the middle value.

Read the Brand Size Chart Correctly

Each manufacturer publishes its own sizing table, and the ranges do not line up across brands. A size M from one company may fit like an L from another. Always use the chart from the specific sec modular helmet model you plan to buy, not a generic table.

Size label Head circumference (typical brand format)
XS Check the model’s own chart
S Check the model’s own chart
M Check the model’s own chart
L Check the model’s own chart
XL Check the model’s own chart

If your measurement falls between two sizes, manufacturers usually recommend the smaller size for a modular helmet. Padding compresses over time, and a helmet that is slightly loose tends to become more comfortable as it breaks in.

Check the Fit Once the Helmet Arrives

A chart gets you close, but the fit test confirms the choice. Put the helmet on with the chin bar closed and fastened, then check these points:

  • The helmet should feel firm across the forehead and cheeks, with even pressure all the way around.
  • Shake your head side to side and up and down. The helmet should move with your head, not rotate or slip forward.
  • Look for pressure points, especially at the temples or the crown. Mild pressure is normal, but sharp pain is a sign of the wrong size or shape.
  • Check that the chin bar closes smoothly and locks without gaps at the sides.

Wear the helmet for 15 to 20 minutes in the store or at home before deciding. Some fit issues only show up after the padding settles against your head.

Consider Head Shape and Cheek Padding

Two riders with the same head circumference can need different helmets. Round-headed riders and oval-headed riders often find that different shell shapes sit more comfortably. Removable cheek pads can also change the fit, so check whether your model includes thicker or thinner pad options before you order. Owners often report that swapping cheek pads solves a snug feeling without moving to a larger shell.

Common Mistakes

  • Measuring over hair, a hat or a loose band, which adds size that your head does not have.
  • Using a chart from a different brand or model year.
  • Sizing up to get extra room, which can cause the helmet to shift during a crash.
  • Judging fit with the chin bar open, which hides how the shell sits on your head.
  • Skipping the fit check and assuming the helmet will loosen with use.

FAQ

Should I size up or down if I am between sizes?

For most modular helmets, choose the smaller size so the padding can settle. A helmet that is too large can move during an impact and reduce protection.

Can I use my hat size instead of head circumference?

No. Hat sizes are based on a different measurement and do not translate reliably to helmet charts. Always measure head circumference directly.

How do I know if my helmet is too tight?

Sharp or constant pain, headaches that start after wearing it, or deep red marks that fade slowly are signs of excessive pressure. If the problem continues, consult a helmet fitter or a professional at a motorcycle gear shop.

Conclusion

Measure your head carefully, use the chart for the exact sec modular helmet model you want, and confirm the fit by shaking your head with the chin bar closed. If the helmet is firm, stable and free of sharp pressure points, you have the right size. Recheck the fit after a few rides, since padding can change over time.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our motorcycle riding gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Max Motorcycle Videos.