We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Full Face Helmet Camera Mount: 7 Steps to a Secure Setup

Learn how to choose and install a full face helmet camera mount safely. Covers chin, visor, and vent options, steps for a stable setup, and common mistakes.

Updated November 2026

A full face helmet camera mount lets you record your ride from a fixed, repeatable angle without relying on handheld gear or a loose strap. In this guide you will learn which mount type suits your helmet, how to position and fasten the camera so it stays put at speed, and how to check the setup before you ride. The process takes about 20 to 30 minutes once you have the right parts on hand.

Why Mount Choice Matters on a Full Face Helmet

A full face helmet has a very different shape from an open face lid, and that shape limits where a camera can go. The chin bar, the visor, and the vent openings all affect airflow, sightlines, and how much the camera shakes at highway speed. A mount that works well on a flat-top open face helmet may vibrate badly or block the visor on a full face model. Start by understanding the mounting points your helmet offers before you buy anything.

Shopping for one? See our guide: 4 Best Helmet Mount Camera Picks: Options Compared for Riders (2026).

Step 1: Identify Your Mounting Points

Most full face helmets give you three realistic options for a camera:

  • Chin bar or chin mount: Attaches to the front of the chin bar, usually with adhesive or a bracket. This gives a forward-facing view of the road and your hands on the bars.
  • Visor or top-of-helmet mount: Mounts above the visor area. Gives a wider field of view but can obstruct your sightline if placed carelessly.
  • Side mount: Attaches to the side of the shell, often near the cheek pad. Captures a profile view and is common for showing your lean angle.

Look for flat, clean surfaces with enough room for the mount base. Avoid placing anything over vents, the visor latch, or any area that could interfere with the shield closing.

Step 2: Check Compatibility Before You Buy

Confirm three things before ordering: the mount’s base pattern, the camera’s mounting system, and the helmet’s shell material. Many mounts use a standard 1/4-inch or GoPro-style interface, so check that your camera accepts the same connection. Adhesive bases bond best to smooth, clean shell surfaces, but some helmet manufacturers specify against adhesives on certain shell materials, so read the helmet manual first.

Step 3: Choose the Right Mount Type for Your Riding

Match the mount to how you ride and what you want to film:

Mount Location Best For Main Drawback
Chin bar Forward road view, hand and throttle footage Can be affected by wind buffeting
Top or visor area Wide field of view, horizon framing Risk of sightline obstruction if poorly placed
Side of shell Lean angle and profile shots Narrower forward view

Step 4: Gather the Tools and Supplies

Before you start the install, have these items ready:

  1. The mount kit with base, arm, and fasteners
  2. Isopropyl alcohol and a lint-free cloth for cleaning the shell
  3. Painter’s tape to mark the position
  4. A small Allen or hex key if the mount uses one
  5. A tape measure or ruler
  6. Zip ties or a hook-and-loop strap as a backup retention method

Step 5: Clean and Mark the Mounting Area

Clean the shell with isopropyl alcohol and let it dry completely. Oils from your hands or residue from cleaning products will weaken adhesive bonds. Next, use painter’s tape to outline the base position, then sit on the bike in your riding posture and check that you can see clearly with the visor up and down. Adjust the tape until the camera frame and your sightline both work.

Step 6: Install and Secure the Mount

If using adhesive, press the base firmly for the time the manufacturer specifies, usually several minutes, then allow the full cure time before riding. Manufacturers often list curing windows of 24 hours or longer for the strongest bond, so follow their instructions rather than rushing. Tighten all arm and camera fasteners by hand first, then give them a final snug turn. Over-tightening can crack plastic arms or strip threads.

Attach the camera and check the aim. Frame the horizon near the upper third of the image for a road-facing shot, and confirm the lens is clear of any part of the helmet.

Step 7: Test the Setup Before a Full Ride

Do a short test in a parking lot or quiet road. Check these points:

  • The camera does not wobble when you tap the mount
  • The visor opens and closes fully without contact
  • Your sightline is clear in both visor positions
  • The lens is free of glare or obstruction at your normal head angle
  • The footage is stable after a few minutes at moderate speed

Make adjustments before any longer ride, and recheck fasteners after your first few trips since vibration can loosen them.

Common Mistakes

  • Mounting over a vent or the visor latch. This can block airflow or stop the visor from seating properly.
  • Skipping surface prep. Adhesive bonds weaken quickly on dusty or oily shells.
  • Ignoring wind noise. A heavy camera on a long arm can create buffeting. Choose a lighter setup or a shorter arm if you hear a loud hum.
  • Overtightening plastic parts. Snug is enough; forcing threads causes cracks.
  • Riding without a test. A loose mount can detach at speed, so always do a short check first.
  • GoPro Helmet Front Mount: A widely used chin-area adapter that works with compatible action cameras and gives a stable forward view. View on Amazon
  • GoPro Helmet Side Mount: Positions the camera on the side of the shell for profile and lean-angle footage. View on Amazon
  • Isopropyl alcohol (70%): Cleans the shell surface so adhesive bases bond properly before installation. View on Amazon

Tips for a Better Setup

Record a short clip at a standstill and again at speed to compare stability. Keep spare fasteners in your bag, since they are easy to lose on the road. If you switch between helmets, consider a universal mount system so you do not need to re-adhere a base each time. For more on specific mount types, see Motorcycle Helmet Camera Chin Mount: 6 Steps to a Stable Setup and Side Mount Helmet Camera: 3 Best Picks Compared for Riders (2026).

FAQ

Is a full face helmet camera mount safe to use?

A properly installed mount that does not block the visor, vents, or sightline is generally considered safe. Always test the setup before riding and recheck fasteners after early trips.

Can I use adhesive on any full face helmet?

Not always. Some helmet makers advise against adhesives on certain shell materials. Check the helmet manual before bonding anything.

Where is the best place to mount a camera on a full face helmet?

The chin bar gives a forward road view, the top area gives a wider frame, and the side gives a profile angle. The best spot depends on what you want to film and whether it blocks your sightline.

How long should adhesive cure before riding?

Follow the manufacturer’s directions. Many specify a cure time of 24 hours or longer for maximum strength, even if the base feels set sooner.

Why is my helmet camera footage shaky?

Common causes include a loose fastener, a long arm that amplifies vibration, or a mount placed in a turbulent airflow area. Tighten connections and try a shorter or more rigid setup.

Will a camera mount affect helmet protection?

Mounts add weight and can change how the shell sits if installed incorrectly. Avoid modifying the shell structure, and follow the helmet maker’s guidance on accessories.

Should I consult a professional about helmet modifications?

If you are unsure whether a mount is compatible with your helmet, contact the helmet manufacturer or a qualified motorcycle gear specialist before installing it.

Conclusion

A well-chosen full face helmet camera mount gives you steady, useful footage without compromising your view or your helmet’s fit. Identify your mounting points, prep the surface, install carefully, and test before every longer ride. Taking these steps once will save you from shaky clips and loose hardware later.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our motorcycle riding gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Max Motorcycle Videos.