GoPro Camera Motorcycle Helmet Mount: How to Install One Safely

As an Amazon Associate I earn from qualifying purchases. This page may contain affiliate links.

A gopro camera motorcycle helmet mount lets you record your rides hands-free, with the camera fixed to your lid at a consistent angle. This guide walks through choosing the right mount for your helmet type, positioning the camera for usable footage, installing it securely, and checking it before you ride. The goal is a stable, well-framed camera that stays put at highway speed and does not interfere with your helmet’s safety performance.

What You Need Before You Start

Most helmet-mounted GoPro setups use a small set of parts. Confirm you have everything before you begin, because a missing adhesive pad or hardware piece is the most common reason installations get rushed.

Shopping for one? See our guide: Shoei RF-1400 Full Face Motorcycle Helmet Review: Is It Worth It?.

• A GoPro-compatible helmet mount for your helmet style (chin bar, full-face, or open-face)
• The adhesive or strap components that came with the mount, plus spare adhesive pads if your kit includes them
• A mounting arm or extension, if you want the camera positioned away from the helmet shell
• Isopropyl alcohol and a lint-free cloth for cleaning mounting surfaces
• A small hex or Allen key set, usually included, for tightening thumbscrews
• Your helmet manual, to confirm whether any accessory attachment is permitted

Step 1: Check Your Helmet’s Mounting Compatibility

Before you stick or bolt anything to a helmet, read the manufacturer’s guidance. Some helmet makers explicitly warn against adhesive on the shell or drilling into the liner, because either can affect impact performance. Others sell their own camera mount points designed to work with the helmet’s geometry.

Helmet shape matters as much as the manufacturer’s rules. A chin-bar mount works well on flip-up and modular helmets because the chin bar offers a stable, forward-facing surface. Full-face helmets often need a top-mount or a chin-bar-free bracket. Open-face helmets usually take a side or top adhesive mount.

Step 2: Choose the Right Mount Style

Mount styles differ in how they attach and how much they stick out from the helmet. Use this table to narrow your choice.

Mount Type	Best For	Attachment Method	Main Drawback
Chin-bar mount	Modular and flip-up helmets	Clamp or bracket, often tool-free	Can block chin vents if poorly placed
Top or visor-area mount	Full-face helmets	Adhesive pad or screw-in base	Adhesive can be hard to remove cleanly
Side mount	Open-face helmets	Adhesive or strap system	Side position may catch wind noise
Extension arm mount	Riders wanting a wider view	Base plus adjustable arm	Adds weight and wind load

If you ride a modular helmet, a chin-bar clamp usually keeps the camera off the shell entirely. If you want a clean look and a permanent install, an adhesive base on a suitable surface works well, though it is harder to undo.

Step 3: Position the Camera for Usable Footage

Placement determines whether your footage is useful. A camera pointed at your chin or the inside of the visor records little beyond glare and helmet interior. Aim for a view that shows the road ahead and the horizon.

Set the Angle

Sit on the bike in your normal riding position and have someone check the frame, or use a phone mirror to watch the preview. Tilt the camera slightly downward so the horizon sits in the upper third of the frame. Too much downward tilt puts the tank and dashboard in view and wastes frame space.

Check Field of View

Set the GoPro’s field of view based on how much you want in the shot. Wide settings show more of the road but add a fisheye curve at the edges. Narrower settings look more natural. Record a short test clip at a stop and review it before a full ride.

Keep the Lens Clear of the Visor

If the camera sits behind or near the visor, check that the visor does not fog the lens or reflect light into the frame. Some riders place the camera just above the visor line to avoid this.

Step 4: Install the Mount Securely

For Adhesive Mounts

1. Clean the helmet surface with isopropyl alcohol and let it dry fully.
2. Warm the adhesive pad slightly if your kit instructions recommend it, which can improve bonding in cold weather.
3. Press the base firmly for the time specified by the manufacturer, usually a sustained push of around 30 seconds or as the instructions state.
4. Wait the full cure period before riding. Many adhesive bonds need several hours to reach full strength.

For Clamp or Strap Mounts

1. Fit the clamp on the chin bar or strap system before tightening anything.
2. Tighten thumbscrews by hand, then add a small additional turn with the key if included.
3. Give the mount a firm tug in several directions. It should not shift, rotate or rattle.

Step 5: Test the Setup Before You Ride

Run a checklist before leaving the driveway:

• Shake your head gently side to side and up and down; the camera should stay fixed.
• Confirm the helmet still sits correctly and the chinstrap fits without pressing the mount into your face.
• Check that vents, the visor and the face opening are unobstructed.
• Record a 30-second clip at low speed and review the framing and stability.
• Make sure the battery and memory card are ready and the camera is locked in its mount.

Recheck the mount after the first short ride. Vibration can loosen clamps or soften adhesive edges.

Tips for Better Helmet-Cam Footage

• Use the camera’s stabilization setting, but expect some residual shake from helmet movement.
• Lower the frame rate if you are shooting in bright sun to reduce flicker and file size.
• Carry a microfiber cloth to wipe the lens, since road spray leaves haze quickly.
• Remove the camera when parking in high heat, which can damage batteries and adhesive.

Common Mistakes

• Mounting over a vent or fastener: This can restrict airflow or interfere with the helmet’s hardware.
• Skipping surface prep: Dust and oils are the leading cause of adhesive failure.
• Riding too soon after applying adhesive: Give bonds the full cure time.
• Ignoring helmet manufacturer warnings: Some shells are not designed to take adhesive or drilling.
• Using an oversized camera setup: Heavy mounts and extension arms add leverage and wind noise.

Recommended gear

A chin-bar clamp mount is a good starting point for modular and flip-up helmets because it avoids adhesive on the shell. View on Amazon

An adhesive flat mount with a curved base suits full-face and open-face helmets where you want a low-profile install. View on Amazon

A thumbscrew-style extension arm lets you adjust camera distance and angle without replacing the base. View on Amazon

For more background on helmet choice before you add a camera, see 7 Best Full Face Moto Helmet Picks for Every Rider (2026) and 6 Best Biker Full Face Helmets of 2026: Buyer's Guide.

FAQ

Can I stick a GoPro to my helmet with adhesive?

Yes, many riders do, but check your helmet manufacturer’s guidance first. Some shells are not designed for adhesive, and removing the pad can leave residue or damage the surface.

Where is the best place to mount a helmet camera?

Most riders choose a chin-bar position on modular helmets or a top or side position on full-face and open-face helmets. The right spot is the one that frames the road and horizon without blocking vents or the visor.

Does a helmet camera affect helmet safety?

Accessories can change how a helmet performs if they alter the shell, liner or fit. Follow the helmet maker’s instructions, avoid drilling, and recheck fit after installing any mount. For specific questions, consult the helmet manufacturer.

How do I stop the footage from shaking?

Use a stable, low-profile mount, avoid long extension arms, and enable the camera’s stabilization. Some vibration is normal, so test at different speeds before judging the result.

Will a chin mount block airflow?

It can if placed over a vent. Position the mount away from intake vents and confirm that airflow is unchanged at speed.

How do I remove an adhesive mount without damaging the helmet?

Warm the adhesive gently with a hair dryer and lift the base slowly with dental floss or a plastic pry tool. Clean any residue with isopropyl alcohol.

Should I remove the camera when I park?

Yes, especially in hot weather. Heat can degrade batteries and weaken adhesive bonds, and an unattended helmet can attract theft.

Conclusion

A well-installed gopro camera motorcycle helmet mount gives you steady, usable footage without compromising your helmet. Match the mount to your helmet style, position the camera so the horizon and road are in frame, and cure or tighten the install before riding. Recheck the setup after your first few rides, and follow your helmet maker’s guidance throughout.

Related reading

• 5 Best Full Face Motorcycle Helmet Helmets for Every Ride (2026)
• Mountain Bike Full Face Helmet Fox?

About the author