We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Motorcycle Cover for Rain: How to Choose and Use One Safely

Choosing a motorcycle cover for rain? Learn which fabrics block water, how to fit one securely, and the mistakes that trap moisture under the cover.

Updated November 2026

A good motorcycle cover for rain keeps water off the bike while letting moisture from the engine, seat and tank escape. This guide walks you through choosing a waterproof fabric, fitting the cover so it stays put in wind, and using it without trapping condensation. Follow the steps below and your bike will stay dry during a storm or a long wet spell.

Choose a Fabric That Is Waterproof and Breathable

Look for covers made from coated polyester or nylon, often labeled with a denier rating. Higher denier fabrics generally resist tearing better, but a waterproof coating matters more than thickness for rain. Many covers also list a breathable layer or ventilation panels, which help release trapped vapor. Avoid plain cotton or untreated fabric, since it soaks up water and holds it against the paint.

Shopping for one? See our guide: 3 Best Motorcycle Covers for Harley Davidson Bikes (2026).

Match the Cover to Your Motorcycle’s Size

A cover that is too loose will flap in the wind and rub the paint, while one that is too tight can tear at the seams. Measure your bike from the front of the handlebars to the rear tip of the tail, and compare that length with the size chart in the manufacturer’s listing. Pay attention to mirrors, saddlebags and windshields, since many covers include mirror pockets or cutouts. If your bike has accessories, choose a cover sized for the widest point.

How to Fit a Rain Cover Securely

Follow these steps for a secure fit:

  1. Let the bike cool completely so the engine and exhaust are not hot when you cover it.
  2. Stand the bike on its side stand or center stand on level ground, and make sure the kickstand is not sinking into soft soil.
  3. Drape the cover from the front, pulling it over the seat and down both sides.
  4. Fasten the front and rear straps or elastic cords under the frame, not around the exhaust.
  5. Check that the cover sits clear of the exhaust pipes and that no seams are stretched.

Prevent Trapped Moisture and Condensation

A cover can hold water inside if it is put on wet or left on during long humid periods. Wipe the bike dry before covering it if you can, and remove the cover once the rain stops so air can circulate. Open any vents on the cover and avoid sealing it tightly against the ground. If you store the bike in a damp area, place a moisture absorber inside the cover or lift the hem slightly.

Protect the Seat and Paint

Seats are the most vulnerable part during rain because water can soak in and cause mildew. Choose a cover with a padded or fitted seat area, and check the paint after removing it for any rubbing marks.

Common Mistakes

  • Covering a hot engine, which can melt or scorch the fabric.
  • Leaving a wet cover on for days, which traps moisture against the paint.
  • Using straps around the exhaust, which can melt or loosen over time.
  • Buying a cover that is too small for the bike’s full length.
  • Skipping a check of the seams and grommets after each storm.
  • A tie-down strap set helps keep the cover in place in gusty wind and works with most bikes. View on Amazon
  • A microfiber drying towel lets you wipe the bike before covering it so less water is sealed in. View on Amazon

For more background, see Rain Bike Cover Motorcycle: How to Choose and Use One (Step-by-Step) and Pop Up Motorcycle Cover: How to Choose and Use One Safely (2026). If you are sizing a cover by brand, Oxford Motorcycle Cover Size Guide: 5 Steps to the Right Fit (2026) covers measuring in more detail. For fabric comparisons, see Oxford Fabric Motorcycle Cover: How to Choose and Use One (2026).

FAQ

Is a motorcycle cover for rain fully waterproof?

Many are water-resistant rather than fully waterproof, especially at seams and grommets. Check the product listing for a waterproof coating and seam sealing if you ride in heavy rain.

Can I leave a rain cover on the bike all the time?

It is better to remove it once the weather clears, since long periods under a damp cover can trap moisture. Let the bike air out before recovering it.

Will a cover scratch the paint?

It can if grit gets trapped under the fabric and the cover moves in the wind. Wipe the bike clean first and keep the straps snug to limit rubbing.

Conclusion

A motorcycle cover for rain works best when it is waterproof, correctly sized and fitted with secure straps away from the exhaust. Dry the bike before covering it and remove the cover once the storm passes to avoid trapped moisture. Check the cover after each use, and it will protect your bike for many wet seasons.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our motorcycle riding gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Max Motorcycle Videos.