Dowco Motorcycle Cover Size Chart: How to Find the Right Fit (2026)
Use this dowco motorcycle cover size chart guide to measure your bike and pick the right Dowco cover size, so it fits snugly without flapping in the wind.
Updated November 2026
A dowco motorcycle cover size chart tells you which cover length and fit suits your bike, but the chart only works if you measure correctly first. In this guide you will take the three measurements that matter, match them to the chart, and avoid the sizing mistakes that leave covers loose, tight or unable to fit over luggage and accessories.
Step 1: Gather the Right Measurements
Before you look at any size chart, measure your motorcycle while it is parked on level ground. Use a soft tape measure and keep it straight along the bike rather than following curves too tightly.
Shopping for one? See our guide: 8 Best Chain and Cable Lubes for Motorcycles Compared (2026).
- Overall length: Measure from the tip of the front fender to the tip of the rear fender or tail section, following the bike’s centerline.
- Overall height: Measure from the ground to the highest point, usually the windscreen, handlebars or mirrors, depending on what you want the cover to clear.
- Width: Measure across the widest part, typically the handlebars or mirrors, to confirm the cover will not pinch them.
Write each number down in inches and centimeters if the chart lists both. Mixing units is one of the most common causes of ordering the wrong size.
Step 2: Match Your Measurements to the Chart
Compare your numbers with the length and height ranges on the dowco motorcycle cover size chart for the specific cover line you are considering. Dowco typically groups covers by bike size category, so check that the category description matches your bike’s style, not just its engine displacement.
| Your Measurement | What to Look for on the Chart |
|---|---|
| Overall length | Choose the size whose length range includes your number, with a few inches of spare room |
| Overall height | Confirm the cover’s height covers your windscreen or handlebar peak |
| Width at widest point | Make sure the cover is wide enough to clear mirrors and handlebars |
If your bike falls between two sizes, pick the larger one. A cover that is slightly big can be tightened with the built-in cinch straps, but a cover that is too small will stress seams and may not reach the ground.
Step 3: Account for Accessories and Luggage
Size charts assume a stock motorcycle. Add the extra clearance if you run a windshield, hard saddlebags, a top case or a tall aftermarket exhaust. Measure the bike with these items installed, since they can add several inches to height and width.
For a motorcycle with a large windscreen or touring fairing, look for a cover with a higher profile and a more generous front opening. Check the product description for notes on compatibility with fairings and hard bags.
Step 4: Confirm Fit Before You Buy
- Compare your final measurements against the chart one more time.
- Check whether the listing names your make and model or only a size category.
- Read the included fit notes for any clearance warnings about mirrors or accessories.
- If you are between sizes or unsure, contact the seller or manufacturer for guidance before ordering.
Common Mistakes
- Measuring with the bike on a slope, which skews length and height readings.
- Ignoring windscreens, bags or mirrors that add clearance requirements.
- Choosing the smallest size to reduce flapping, which can strain seams.
- Assuming engine size alone determines the correct cover size.
- Forgetting to check whether the chart uses inches or centimeters.
Recommended Gear
- A flexible fiberglass or soft steel tape measure lets you follow curves around the bike accurately. View on Amazon
- A basic notepad or phone notes app keeps your three numbers together when comparing charts. View on Amazon
FAQ
Should I measure the bike with a windscreen installed?
Yes. Measure the bike exactly as you ride it, with windscreens, bags and mirrors in place, so the height and width numbers reflect the real clearance you need.
What if my measurements fall between two sizes?
Choose the larger size. Extra material can be cinched down, while a cover that is too small can tear at the seams or fail to reach the ground.
Does the size chart work for every motorcycle?
It is a starting point rather than a guarantee. Check the product’s compatibility notes and contact the manufacturer if your bike has unusual accessories or an uncommon shape.
Conclusion
Measure your motorcycle’s length, height and width, including any accessories, then match those numbers to the dowco motorcycle cover size chart. Pick the larger size when you fall between two options. Taking a few minutes to measure carefully will save you from a loose, flapping or ill-fitting cover.
Related reading
- Wind Rider Motorcycle Seat Cover: Fit, Use and Buying Tips for Riders
- Seat Cover Motorcycle Replacement: 6 Steps to Fit a New One (2026)
- Exhaust Pipe Cover Motorcycle Guide: How to Choose and Fit One (2026)
- White Lightning Clean Ride Chain Lube: 3 Best Picks for Motorcycle Riders (2026)
Ready to choose one?
