We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Wash Motorcycle Cover Without Scratching It: A Step-by-Step Guide

Learn how to wash motorcycle cover fabric safely, from pre-rinse to drying, so you avoid scratches, fading and water-resistance loss on your bike.

Updated November 2026

Knowing how to wash motorcycle cover material properly keeps the fabric water-resistant, prevents grit from grinding into the surface, and extends the life of the cover. Most covers can be cleaned by hand in about 30 minutes with a mild soap, a soft sponge and plenty of rinsing. The key is to avoid harsh detergents, hot water and machine agitation.

Check the Care Label and Gather Supplies

Before you start, read the manufacturer’s care instructions. Many covers are made from polyester or nylon with a water-resistant coating, and the label will tell you whether machine washing is allowed or whether hand washing is required. Some covers should never go in a dryer.

Shopping for one? See our guide: How Often to Clean and Lube Motorcycle Chain (2026): Which Should You Choose?.

You will need:

  • A bucket of lukewarm water
  • A mild, pH-neutral soap or a cleaner made for outdoor fabrics
  • A soft sponge or microfiber cloth
  • A garden hose or large container for rinsing
  • A clean, dry area in shade for air drying

Step-by-Step: Hand Washing a Motorcycle Cover

  1. Remove the cover from the bike and shake out loose dirt and leaves away from the bike.
  2. Pre-rinse with cool water to loosen mud, bug residue and grit. Rinse the inside too if it has been exposed to road spray.
  3. Mix soap in lukewarm water following the product’s dilution ratio. Too much soap can leave a film that reduces water resistance.
  4. Wash gently in straight strokes with the sponge or cloth. Work from the top down and clean the seams and hem areas carefully.
  5. Rinse thoroughly until no suds remain. Soap left in the fabric can attract dirt and stiffen the material.
  6. Air dry completely in shade, draped over a clean surface or hung loosely. Never fold the cover while it is damp.

Machine Washing and Drying Considerations

Some covers are labeled machine washable. If yours is, use a front-loading machine or a gentle cycle with cold or warm water, a small amount of mild detergent and no fabric softener. Fabric softener coats the fabric and can break down water repellency. Skip the dryer unless the label specifically allows low heat, since high heat can warp the coating and shrink seams.

Restore Water Resistance After Washing

Washing can strip some of the factory water-repellent finish. Once the cover is fully dry, check whether water beads on the surface. If it soaks in, apply a fabric-safe water repellent spray designed for outdoor gear, following the product directions. Test a small hidden area first.

Common Mistakes

  • Using dish soap or household detergents, which can strip coatings.
  • Scrubbing hard enough to abrade the fabric or paint underneath.
  • Drying in direct sun for long periods, which can fade colors and degrade the coating.
  • Storing the cover while it is still damp, which invites mildew.
  • Washing the cover while it is still on a hot engine or exhaust.
  • Nikwax Tech Wash is a technical fabric cleaner designed for outdoor gear and is often suggested for cleaning water-resistant textiles without leaving residue. View on Amazon
  • Nikwax TX.Direct Wash-In is a wash-in waterproofing product for technical fabrics, useful for restoring water repellency after cleaning. View on Amazon
  • Microfiber wash mitt provides a soft, low-abrasion surface for cleaning without scratching. View on Amazon

FAQ

Can I wash a motorcycle cover in the washing machine?

Only if the care label allows it. Use a gentle cycle with cold or warm water, mild detergent and no fabric softener, then air dry.

How often should I wash my motorcycle cover?

Wash it when it is visibly dirty, after exposure to salt or road grime, or before storing it for a long period. Regular light cleaning helps prevent buildup.

Will washing remove the water resistance?

It can reduce it, especially if soap residue remains or the factory coating wears off. Reapplying a fabric-safe water repellent after the cover is fully dry usually restores it.

Conclusion

To wash a motorcycle cover well, pre-rinse, use mild soap in lukewarm water, wash gently and rinse thoroughly. Always air dry completely in shade. Following the care label and avoiding harsh products will keep the fabric protecting your bike for longer.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our motorcycle riding gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Max Motorcycle Videos.